Thermogravimetric Study of Cracking Products of Natural Bitumens

Authors

  • Yerzhan Imanbayev Al-Farabi Kazakh National University
  • Yerdos Ongarbayev Al-Farabi Kazakh National University
  • Yerbol Tileuberdi Al-Farabi Kazakh National University
  • Evgenii Krivtsov Institute of Petroleum Chemistry
  • Anatoly Golovko Golovko Institute of Petroleum Chemistry
  • Zulkhair Mansurov Institute of Combustion Problems

DOI:

https://doi.org/10.29356/jmcs.v61i4.465

Keywords:

Thermogravimetric analysis, natural bitumen, oil sand, cracking, activation energy.

Abstract

The cracking and extraction products for Kazakhstan’s oil sand bitumen were determined by thermogravimetric analysis (TGA). By means of this technique, changes in the physical and chemical compositions of natural bitumen occurred during thermal treatment were assessed. The bulk composition was determined and the elemental content of resin-asphaltene compounds evaluated. Microspheres isolated from fly ash after the combustion of coals, were used to catalyze the cracking of natural bitumen. According to elemental analysis, natural bitumen is prone to produce coke formation. Catalytic cracking has a positive effect on the properties of the bitumen obtained from Munaily Mola field. The kinetic reaction orders and activation energies for cracking of natural bitumen were determined fitting the experimental data to an Arrhenius equation. The derived activation energies give insight on the nature of the pyrolysis kinetics of resin-asphaltene.

Downloads

Download data is not yet available.

References

Qing, W.; Chunxia, J.; Qianqian, J.; Yin, W.; Wu D. Fuel Processing Technology. 2012, 99, 110-114. DOI: https://doi.org/10.1016/j.fuproc.2012.02.006

Ma, Y.; Li, Sh. Fuel Processing Technology. 2012, 100, 11-15. DOI: https://doi.org/10.1016/j.fuproc.2012.03.001

Liu, P.; Zhu, M.; Zhang, Zh.; Wan, W.; Yani, S.; Zhang D. Energy Procedia. 2014, 61, 2741-2744. DOI: https://doi.org/10.1016/j.egypro.2014.12.294

Al-Otoom, A.; Al-Harahsheh, M.; Allawzi, M.; Kingman, S.; Robinson, J.; Al-Harahsheh, A.; Saeid A. Fuel Processing Technology. 2013, 106, 174-180. DOI: https://doi.org/10.1016/j.fuproc.2012.07.021

Murugan, P.; Mahinpey, N.; Mani Th. Fuel Processing Technology. 2009, 90, 1286-129-1. DOI: https://doi.org/10.1016/j.fuproc.2009.06.008

Ebrahimi, S.; Moghaddas, J.S.; Razavi Aghjeh M.K. Fuel. 2008, 87, 1623-1627. DOI: https://doi.org/10.1016/j.fuel.2007.08.015

Ongarbayev, Y.K.; Golovko, A.K.; Krivtsov, E.B.; Imanbayev, Y.I.; Tileuberdi, E.; Tuleutaev, B.; Mansurov Z.A. Solid Fuel Chemistry. 2016, 50, 81-87. DOI: https://doi.org/10.3103/S0361521916020063

Murray R. Gray Upgrading Oilsands Bitumen and Heavy Oil, The University of Alberta Press, Alberta, 2015, 220-269. DOI: https://doi.org/10.1515/9781772120226

Anshits, A.G.; Nizov, V.A.; Kondratenko, E.V. et al., Khim. Interesakh Ustoich. Razvit. 1999, 7, 105.

Sviridenko, N.N.; Krivtsov, E.B.; Golovko, A.K. Fundament. Issled. 2014, 8-4, 854.

Tileuberdi, Ye.; Mansurov, Z.; Ongarbayev, Ye.; Tuleutaev, B. Eurasian Chemico-Technological Journal. 2015, 17 (1), 41-45. DOI: https://doi.org/10.18321/ectj193

Sultanov, F.R.; Tileuberdi, Ye.; Ongarbayev, Ye.K.; Mansurov, Z.A.; Khaseinov, K.A.; Tuleutaev, B.K.; Behrendt, F.; Eurasian Chemico-Technological Journal. 2013, 15, 77-81. DOI: https://doi.org/10.18321/ectj143

Imanbayev, Ye.; Ongarbayev, Ye.; Tileuberdi, Ye.; Krivtsov, E.; Golovko, A.; Mansurov, Z.; Journal of the Serbian Chemical Society. 2017, 82 (9), 1063-1073. DOI: https://doi.org/10.2298/JSC161126069I

×

Published

2018-01-30

Issue

Section

Regular Articles
x

Similar Articles

<< < 1 2 3 4 5 6 7 8 9 10 > >> 

You may also start an advanced similarity search for this article.

Loading...